Hill People Gear Forums
HomeHomeDiscussionsDiscussionsFirearms and Sk...Firearms and Sk...Mystery Ranch "Quick Draw" Holster ReviewMystery Ranch "Quick Draw" Holster Review
Previous
 
Next
New Post
6/2/2018 12:59 PM
 

I recently purchased a Mystery Ranch holster, and I thought I'd share some observations on it.

My interest in this holster stemmed from a desire to find a truly rugged, long term outdoor-oriented holster that would mount easily on PALS, such as my Recon Belt. My primary intended firearm to be carried in this holster is a SIG P229 chambered in .40 S&W

To be clear, while I'm going to be critical, by no means am I trying to bash MR - I'll be sure to highlight both the positives and the negatives of this holster as I see them. I tried to post a review on their site but 1) they have a very limited acceptable word count for reviews, and I think some of the issues require depth and explanation, and 2) it seems they must not have liked my review, because it hasn't showed up on the item description to date.

I'll start by sharing a little bit of the process I encountered while doing homework prior to actually receiving the holster. I went to the MR website, and other than finding the physcial outer dimensions of the holster, and the description that said it fits "most semi-auto side arms," I didn't seen much detail about what specific models it might fit or not fit. As most of us with experience know, "universal fit" holsters are a unicorn at best, a disappointment or totally useless at worst. Some basic information about what common models a particular holster fits (even a "universal" or "fits most" option) is extremely useful. 

So, I called MR customer service, explained that I had already been to their website and that I was calling looking for a little more detail on what particular models the holster might fit. The CS rep recited the dimensions from the product description on the website. I told her that, yes, I had seen those dimensions, and that's whay I was calling - to hopefully get a little more detail. She couldn't tell me anything about what particular firearms might fit the holster, even when I asked about some of the most common options that someone would likely carry in a holster intended for this use. She then told me I should take my gun to the local MR dealer and try it out. This was impractical for several reasons, to say the least. So, despite this less than impressive customer service, I was optimistic about the product, given MR's reputation. I figured I'd give it a try and be sure to order it from a store that had free returns if it didn't work out. 

Here are some pics of both sides of the Quick Draw: 

 
New Post
6/2/2018 1:12 PM
 

When I first inserted the P229, it was extremely tight, and took a fair bit of force to get it to seat properly in the holster. A tight fit is generally a good thing in a new holster, and I assume this would loosen up some over time. 

However, when I tried to draw the pistol, it kept getting seriously hung up in two places - the inboard part of the retention strap would hook on the decocker lever. The bottom edge of this strap is not flush with the interior surface of the holster, and is quite thick and stiff, so it will likely hang up on anything it comes in contact with. Hard to see in this pic, but it gives some idea:

At the very least, it seems like mounting this strap externally, rather than internal to the holster, would be a no-brainer. Unfortunately, the inboard part of the retention strap is riveted to the holster and not removable, or I would just ditch it entirely. 

Also, when I would try to draw, the rear sight would get caught on the overlapping fabric seam on the inside of the holster lip, if I pushed the gun fully into the holster.

For these reasons, and the fact that they happened consistently, I pretty quickly determined that I would not carry my P229 in this holster. I then tried a M&P 4.25" and given the lack of external controls, particularly on the left side of the gun, it drew much more smoothly. I'm not sure how well this holster would work with other popular DA/SA options like Beretta, CZ, etc. or with a 1911, but my initial impression is that this holster was designed with streamlined, striker-fired pistols in mind.

The other issue I found was with the outboard half of the retention strap, which is elastic. I don't understand the need for elastic here, since the strap is already adjustable in terms of length, and it's not like it needs to fit super tight - it just needs to prevent the gun from accidentally dropping out of the holster. Unfortunately, with this elastic retention strap engaged, there is a fair bit of "give" that happens before the snap opens, which makes rapid deployment of the gun feel unacceptably sloppy, especially when seconds might count. 

Here you can see how far my thumb is pushing over the retention strap to release it and it's still not opening: 

Thankfully, the elastic part of the retention strap is entirely removable. 

My suggestion here would be to ditch the elastic and just use an adjustable piece of non-stretch webbing. I would also suggest that the inboard part of the strap be entirely removable as well. 

 
New Post
6/2/2018 1:16 PM
 

Positives of this holster? 

  • It's clearly very well made and looks like it would last a long time.
  • The PALS mounting option is great, and with a little fiddling, I was able to get it to mount quite securely on my Recon Belt. 

As mentioned above, if you are running a semi that is largely devoid of external controls that might get hung up, this could be a great option for you. 

Hope this is helpful for anyone considering this holster, since there doesn't seem to be much in the way of reviews out there, nor is the information provided by the manufacturer particularly helpful. I really think this holster has promise, and could be a great option, but there are some design shortcomings that could be easily overcome. Hopefully we'll see these addressed at some point in a more refined, 2.0 version.

 
New Post
11/14/2018 4:41 PM
 

Thanks man - was looking at this holster for my 1911 and CZ 75B.  Appreciate you saving me some time and money.  Looks like it has potential, I thought the PALS set-up would be perfect, but seems like the holster isn't ideal for what I would use it for.

Will keep my eyes open for v2 as you say, and in the meantime working on a DIY PALS holster solution.

Appreciate your review!

 
Previous
 
Next
HomeHomeDiscussionsDiscussionsFirearms and Sk...Firearms and Sk...Mystery Ranch "Quick Draw" Holster ReviewMystery Ranch "Quick Draw" Holster Review